MDR/IVDR Conformity Assessment and Market Access for Medical Devices

Regulatory Affairs • MDR & IVDR from a Single Source • ISO 13485 & ISO 9001 Certified • Compliance

EXCO - Where Regulatory Compliance Meets Engineering

We advise you on applicable standards, General Safety and Performance Requirements (GSPR), and other requirements for market access of your medical device. We conduct gap analyses and help you prepare for audits. Our experts at EXCO do not view regulatory requirements in isolation. We combine Regulatory Affairs, Quality Management, and Engineering to translate regulatory requirements into practical development, evidence, and documentation strategies.


With our scalable Medical Device Services, you can focus on product development while we support you in meeting regulatory requirements and relevant industry standards throughout the development and approval process.

EXCO Services

Disinfectants supporting hygiene, quality, and compliance requirements.

Regulatory Strategy & Classification - MDR/IVDR

Achieving market access for a medical device or in vitro diagnostic (IVD) requires compliance with complex regulatory requirements. EXCO supports you in preparing the EU Declaration of Conformity and implementing the requirements for CE marking.

Our services:

  • Qualification and classification of medical devices and IVDs
  • Development of a tailored regulatory roadmap
  • Definition of an appropriate standards and compliance strategy
  • Selection of the most suitable MDR and IVDR conformity assessment pathway
  • Regulatory assessments and consulting
  • Coordination of testing laboratories and regulatory stakeholders
  • Support in planning market access for your target markets
Consulting session on Computer System Validation (CSV) focused on process assessment and validation requirements.

Regulatory Compliance & Change Management - MDR/IVDR

MDR and IVDR requirements continue to evolve. EXCO supports you in identifying relevant regulatory changes at an early stage and assessing their impact on your products and processes.

Our services - Change Management:

  • Support for MDR/IVDR transitions and implementation of new regulatory requirements
  • Updates to technical documentation
  • Support with product changes, certificate management, and communication with notified bodies
  • Regulatory impact assessments for product and process changes

Our services - Regulatory Compliance:

  • Classification and conformity assessment of medical devices and In Vitro Diagnostics (IVDs)
  • Implementation of UDI and labeling requirements
  • Support with market surveillance, vigilance, and EUDAMED requirements
  • Standards research
  • Consulting and support for the Person Responsible for Regulatory Compliance (PRRC) in accordance with MDR and IVDR
  • Support with post-market surveillance and post-market compliance requirements

This helps you maintain an overview of current regulatory requirements and provides the basis for maintaining MDR/IVDR conformity and certification.

Support for regulatory requirements, compliance assessments, and conformity procedures for medical devices and regulated industries.

Quality & Risk Management

As an ISO-certified company, we support you in the continuous development of your existing Quality Management System (QMS) in accordance with ISO 9001 and ISO 13485, helping you identify regulatory gaps at an early stage and maintain long-term compliance. From gap analyses and reviews of quality-related documentation to audit preparation and the optimization and digitalization of quality processes, we provide targeted support wherever action is required.

Quality Management Services:

  • Consulting on Quality Management Systems (QMS) in accordance with ISO 9001 and ISO 13485
  • Implementation, optimization, and continuous development of QMS in accordance with ISO 9001 and ISO 13485
  • Quality management training and customized training programs
  • QMS Digitalization
  • Gap analyses and QMS assessments
  • Preparation, revision, and review of quality-related documentation
  • Preparation of GSPR evidence and traceability matrices
  • Inspection readiness through mock audits, internal audits, and preparation for regulatory inspections
  • Support during certification audits, regulatory inspections, and notified body audits
  • CAPA management and post-inspection support
  • Continuous improvement of processes and systems

Risk Management Services:

  • Risk management in accordance with ISO 14971
  • Facilitation of risk analyses
  • Consulting and optimization of risk assessments
  • Optimization of standard operating procedures
Robot-assisted testing system for automated functional, verification, and validation testing of medical devices.

Verification & Validation

To bring your medical device to market safely, in compliance with applicable standards, and with confidence, all requirements relating to functionality, performance, and safety must be demonstrably fulfilled.

Verification and validation activities provide the evidence required for approvals, audits, and regulatory inspections while helping to minimize risks throughout the development process. Our experts at EXCO support you from test strategy and execution through to complete documentation.

Our services:

  • Mechanical testing, environmental testing, and EMC testing
  • Design verification and product testing
  • Manual and automated software testing, including integration, system, and ad hoc testing
  • Development of test frameworks and test automation solutions
  • Code reviews
  • Qualification, process validation, and method validation
  • Test laboratory coordination
  • Preparation of quality-related and technical documentation in accordance with MDR and IVDR

Learn more: Medical Device Development Services

Electronic documentation supporting compliance, validation, and quality management processes.

Technical Documentation - MDR/IVDR

Our experts support you in bringing your medical device to market in compliance with regulatory requirements and align your technical documentation with current regulatory expectations. Through our Audit & Inspection Readiness services, we also assess how well your existing documentation is prepared for audits, notified body reviews, and MDR/IVDR conformity assessment procedures.

Our services:

  • Consulting, preparation, review, and optimization of technical documentation in accordance with MDR and IVDR
  • Structured gap analysis of technical documentation with regard to completeness, plausibility, and regulatory compliance
  • Review of General Safety and Performance Requirements (GSPR)
  • Assessment of traceability between requirements, evidence, and documentation
  • Early identification of regulatory risks and compliance gaps
  • Preparation for audits, notified body reviews, and approval procedures
CE marking on a product representing regulatory compliance and market approval.

CE Marking & EU Conformity Assessment

Have you developed a product and are looking to bring it to market successfully? CE marking is an important step towards legally compliant market placement.

We support you throughout the entire EU conformity assessment process, from requirements analysis, QMS, processes, and technical documentation to audits, inspections, and assessments by notified bodies and competent authorities, through to the preparation of the EU Declaration of Conformity and CE marking.

Our services:

  • Analysis of relevant directives, regulations, and standards, such as Machinery Regulation (EU) 2023/1230 and Low Voltage Directive 2014/35/EU
  • Standards and regulatory research as well as compliance assessment
  • Execution and support of conformity assessment procedures
  • Preparation, review, and optimization of technical documentation and technical files
  • Risk assessments and demonstration of product safety in accordance with relevant standards, including DIN EN ISO 12100, DIN EN ISO 13849, and DIN EN 60204-1
  • Support with test strategy, verification planning, and coordination of external testing
  • Support in cooperation with testing laboratories
  • Preparation of the EU Declaration of Conformity and support with CE marking
  • Consulting and training on product compliance and EU conformity

With EXCO, you receive all services related to CE marking, technical documentation, and product compliance from a single source. This helps you bring your products to the European market efficiently, safely, and in compliance with applicable regulations.

Consulting on regulatory requirements, conformity assessment, and market access under MDR and IVDR.  Geben Sie Ihr Feedback zu BizChat ab.

Post-Market Surveillance & Lifecycle Compliance

Even after market approval, EXCO supports you in maintaining regulatory compliance throughout the entire product lifecycle. We support you in planning and implementing post-market activities, monitor regulatory changes, and assist in the assessment of product changes to help ensure the ongoing compliance of your medical device.

Our services:

  • Support for Post-Market Surveillance (PMS) and Post-Market Performance Follow-up (PMPF)
  • Support for Post-Market Clinical Follow-up (PMCF)
  • Vigilance management and support with reporting obligations
  • Assessment of changes to standards and regulatory updates
  • Assessment and documentation of product changes
  • Support in maintaining MDR and IVDR compliance throughout the product lifecycle
TÜV SÜD certified quality management systems according to ISO 13485 for medical devices and ISO 9001.

EXCO's Quality Standard

Certified by TÜV SÜD to EN ISO 13485:2016 and DIN EN ISO 9001:2015

EN ISO 13485:2016 - The Provision of Design and Development Services for Components, Semi-Finished Products and Manufacturing Processes for Medical Devices and In Vitro Diagnostics. The Provision of Development Services and of Testing and Production Equipment for the Manufacturing of Medical Devices and In Vitro Diagnostics, including Robot-Based Physical Testing for Use within Product Development, Verification or Validation Activities. The Provision of Regulatory Affairs Services for Medical Devices and In Vitro Diagnostics. The Provision of Qualification and Validation Services for the Manufacturing of Medical Devices and In Vitro Diagnostics.

DIN EN ISO 9001:2015 - Design and development of components, semi-finished products, manufacturing processes, software as well as production of test and production equipment as well as provision of services in laboratory analysis

Why EXCO for Medical Device Conformity Assessment and Market Access?

With certifications to ISO 13485 and ISO 9001, we work in accordance with the high quality standards that are essential for the development and approval of medical devices.

Mit EXCO, you benefit from a comprehensive service portfolio covering the entire product lifecycle. From Regulatory Affairs and technical documentation to quality and supplier management, as well as UDI and EUDAMED, you receive all relevant services from a single source. This reduces interfaces, saves time, and gives you a single point of contact at every stage.

Discover our full service portfolio: EXCO Services

We support you in implementing current MDR and IVDR requirements, assess regulatory changes, and help ensure that your products and processes remain compliant over the long term.

EXCO supports you not only with individual projects but also on an ongoing basis in the further development of your products, processes, and regulatory strategies.

Our goal is to make approval processes as efficient as possible, identify regulatory risks at an early stage, and support you in bringing your products to market safely and successfully.

Every medical device comes with its own set of requirements. That is why we develop solutions tailored to your products, processes, and regulatory challenges.

Contact us

Your Contacts

Tatjana Burchart

Product Solutions

+49 6233 73778-140

Alexander Poggenwisch

Product Solutions

+49 6233 73778-142

Get in touch with our EXperts

Your data will only be used to respond to your inquiry and will not be shared with third parties. For more information on how we handle your personal data, please see our Privacy Policy.

Please add 4 and 3.
Laboratory environment supporting conformity assessment, regulatory approval, and market access under MDR and IVDR.

EXCO Services

EXplore our EXCO Services

As a full-service provider, we support SMEs and large corporations with high-quality technical solutions in software engineering, systems development, automation, and quality assurance for highly regulated markets. Our customers include companies in the medical technology, pharmaceutical technology, biotechnology, chemical, and food technology sectors, as well as other regulated industries.

Discover EXCO

References

Our References

Accompaniment of MDR Product Licensing

EXCO advises a medical device manufacturer on the new European Medical Device Regulation (MDR).

To the project

System engineering for a pharmaceutical manufacturer

EXCO is supporting pharmaceutical companies in designing and qualifying filling systems in their cleanrooms.

To the project

Verification and validation of COVID-19 Rapid Tests

EXCO supported a security technology manufacturer with the compliant market introduction of a SARS-CoV-2 rapid test.

To the project

References overview

Discover more projects in our reference overview.

To the reference overview

FAQ

FAQs - About EXCO

As a global technical service provider, EXCO supports companies in regulated industries throughout the entire product lifecycle, from development and quality assurance to regulatory affairs and product approval. Explore our complete range of services: EXCO Services

Since 1994, EXCO has been synonymous with technical expertise and practical solutions for regulated industries. Today, more than 200 employees across 8 locations support customers worldwide with development, quality assurance, and regulatory approval projects.

We focus on the medical technology, pharmaceutical technology, biotechnology, chemical, and food technology sectors, as well as other regulated industries.

As an ISO-certified company (ISO 13485 and ISO 9001), EXCO delivers high-quality technical solutions in software engineering, systems development, automation, engineering, and quality assurance. We support our customers throughout the entire product lifecycle, from initial concept and development to regulatory approval, post-market surveillance, and ongoing product improvement. Explore our full range of services: EXCO Services.

EXCO is headquartered in Frankenthal (Pfalz), Germany, with additional locations across Germany and a subsidiary in Switzerland, EXCO Consulting GmbH. This regional presence enables us to provide flexible, responsive support close to our customers.